Mobile Transformer Oil Reprocessing
Plant, a 6 x 2 rigid vehicle box van with separate welfare
facilities trailer, further features including:
• Dual Filter facility with various micron ratings down to 0.2 micron
• A Dual Strainer facility.
• A variable flow rate of between 2,000 and 10,000 litres per hour.
• A two stage vacuum facility offering a 200m3/hr vacuum pump and a
1400m3/hour vacuum booster with a vacuum connection point to allow
the same vacuum facility to be used to pull vacuum within a transformer.
• A heating facility in four stages offering a total of 160 kW.
• The plant will be capable of reducing in single pass content from 50ppm
to 3ppm moisture and 12% gas content to less than 0.1% by volume.
98% of particulate matter will also be removed.
• ln-line moisture meter to detect moisture from source prior to transformer.
• Fully automatic with air operated valves, full interlock will close valves automatically.
• PLC control via laptop facility.
• All oil will processed to a minimum of BS:148, or any other customer specification.
We carry the following ancillary equipment:
• Generator unit with noise reduction containment
• 2000 litre fuel tank for above
• Spill prevention equipment and kits
• First aid kits and eye wash facilities
• Drip trays
• Composite hoses tested up to 10 bar
We have the following testing/reporting facilities on board:
• Moisture using Coulometric Karl Fischer titration
• Dielectric Breakdown to 100 KVA fully calibrated.
We will provide 500 ml samples with unique reference number tied to
transformer and fully recorded within a database, including results of job and
time taken to process.
• A heating facility in four stages offering a total of 160 kW.
• The plant will be capable of reducing in single pass content from 50ppm
to 3ppm moisture and 12% gas content to less than 0.1% by volume.
98% of particulate matter will also be removed.
• ln-line moisture meter to detect moisture from source prior to transformer.
• Fully automatic with air operated valves, full interlock will close valves automatically.
• PLC control via laptop facility.
• All oil will processed to a minimum of BS:148, or any other customer specification.
We carry the following ancillary equipment:
• Generator unit with noise reduction containment
• 2000 litre fuel tank for above
• Spill prevention equipment and kits
• First aid kits and eye wash facilities
• Drip trays
• Composite hoses tested up to 10 bar
We have the following testing/reporting facilities on board:
• Moisture using Coulometric Karl Fischer titration
• Dielectric Breakdown to 100 KVA fully calibrated.
We will provide 500 ml samples with unique reference number tied to
transformer and fully recorded within a database, including results of job and
time taken to process.